A single Ti-RANT 45 series silencer can be used on a variety of host firearms with different barrel threads by quickly and easily swapping out the threaded A.S.A.P. piston in the rear of the silencer. We manufacture A.S.A.P. pistons to match the barrel threads of all popular factory threaded pistol barrels and many aftermarket barrels. All Ti-RANTô series pistons feature heat treated stainless steel construction, a matte bead blasted finish, and engraving to identify the thread diameter, pitch, and direction of rotation for installation (Right or Left Hand threads). There is a “SHORT” model piston, designed only for use on 1911 pistols WITHOUT a full-length guide rod and on the FN FNP Tactical 45. And now, get a Ti-RANT 45 piston threaded in 1/2-28 or 13.5x1LH to use the Ti-RANT 45 on your 9mm host, or a 9/16×24 threaded piston for use on common .40 cal host pistols.
If you want to use your Ti-RANT 45 on a 9mm pistol with a 1/2×28 thread pitch, then the 1/2×28 variant of this piston is what you want.
The flush version of this piston will work with either a 1911 or a pistol with an extra long threaded barrel. Don’t attempt to use the flush piston with other pistol combinations or there won’t be enough clearance for the guide rod when the weapon cycles. If you have any questions about the flush piston, please contact us.
AAC TI-RANT 45 PISTON
Can be used on a variety of host firearms with different barrel threads by quickly and easily swapping out the threaded A.S.A.P. piston in the rear of the silencer.
.578×28, .578×28 Flush (1911), .578×28, M13.5×1 LH, M16x1 LH (HK USP Tactical), M16x1 RH (HK Mark 23)